Steel Well Seal – Single Drop Pipe – Solid Top – Submersible Pump
• A36 hot roll steel
• Galvanized steel bolts
• 3/4″ molded rubber, 35 durometer
• Powder coated polyester finish
|
–
–
| Standard Gasket Part No. | Smaller Gasket Part No. | Well Size I.D. | Drop Pipe Size | Cable Hole Tapping | Vent Tapping | Top Plate | Max. Load | Wgt | List Price |
| 3841 | – | 3 | 1 1/4 | 1/2 | 1/2 | 3/16 | 2,100 | 1.5 | – |
| 3501 | – | 4 | 1 | 3/4 | 1/2 | 3/16 | 2,100 | 2.1 | – |
| 3502 | – | 4 | 1 1/4 | 3/4 | 1/2 | 3/16 | 2,100 | 1.9 | – |
| 3502-SPLIT | 4 | 1 1/4 | 3/4 | 1/2 | 3/16 | 2,100 | 1.9 | – | |
| 3503 | – | 4 | 1 1/4 Offset | 1 | 1/2 | 3/16 | 2,100 | 1.8 | – |
| 3504 | – | 4 | 1 1/2 | 3/4 | 1/2 | 3/16 | 2,100 | 1.9 | – |
| 3505 | – | 4 | 2 | 1/2 | 1/2 | 3/16 | 2,100 | 1.7 | – |
| 3505-S | – | 4 | 2 | 1/2 (Slotted) | 1/2 | 3/16 | 2,100 | 1.7 | – |
| 3516 (NEW) | – | 4 | 2 | 3/4 | 1/2 | 3/16 | 2,100 | 1.7 | – |
| 3506 | – | 4 | 1 Offset | 1 | 1/2 | 3/8 | 9,000 | 3.0 | – |
| 3507 | – | 4 | 1 1/4 | 3/4 | 1/4 | 3/8 | 9,000 | 2.7 | – |
| 3508 | – | 4 | 1 1/4 Offset | 1 | 1/2 | 3/8 | 9,000 | 2.6 | – |
| 3509 | – | 4 | 1 1/2 | 3/4 | 1/2 | 3/8 | 9,000 | 2.4 | – |
| 3510 | – | 4 | 2 | 1/2 | 1/2 | 3/8 | 9,000 | 2.3 | – |
| Standard Gasket Part No. | Smaller Gasket Part No. | Well Size I.D. | Drop Pipe Size | Cable Hole Tapping | Vent Tapping | Top Plate | Max. Load | Wgt | List Price |
| 3511 | – | 4 1/4 – 4 1/2 | 1 | 3/4 | 1/2 | 3/16 | 2,100 | 2.2 | – |
| 3512 | – | 4 1/4 – 4 1/2 | 1 1/4 | 3/4 | 1/4 | 3/16 | 2,100 | 2.0 | – |
| 3513 | – | 4 1/4 – 4 1/2 | 1 1/4 Offset | 1 | 1/2 | 3/16 | 2,100 | 2.0 | – |
| 3514 | – | 4 1/4 – 4 1/2 | 1 1/2 | 3/4 | 1/2 | 3/16 | 2,100 | 1.9 | – |
| 3515 | – | 4 1/4 – 4 1/2 | 2 | 1/2 | 1/2 | 3/16 | 2,100 | 1.8 | – |
| 3515-S | – | 4 1/4 – 4 1/2 | 2 | 1/2 (Slotted) | 1/2 | 3/16 | 2,100 | 1.8 | – |
| 3843 | – | 4 1/4 – 4 1/2 | Offset 1 | 1 | 1/2 | 3/8 | 9,000 | 3.0 | – |
| 3844 | – | 4 1/4 – 4 1/2 | 1 1/4 | 3/4 | 1/2 | 3/8 | 9,000 | 2.7 | – |
| 3845 | – | 4 1/4 – 4 1/2 | Offset 1 1/4 | 1 | 1/2 | 3/8 | 9,000 | 2.6 | – |
| 3846 | – | 4 1/4 – 4 1/2 | 1 1/2 | 3/4 | 1/2 | 3/8 | 9,000 | 2.4 | – |
| 3847 | – | 4 1/4 – 4 1/2 | 2 | 1/2 | 1/2 | 3/8 | 9,000 | 2.3 | – |
| Flush Bolts Standard Gasket Part No. | Flush Bolts Smaller Gasket Part No. | Well Size I.D. | Drop Pipe Size | Cable Hole Tapping | Vent Tapping | Top Plate | Max. Load | Wgt | List Price |
| 3521 | 3521-T | 5 | 1 | 1 | 1/2 | 3/16 | 1,500 | 2.9 | – |
| 3522 | 3522-T | 5 | 1 1/4 | 1 | 1/2 | 3/16 | 1,500 | 2.7 | – |
| 3523 | 3523-T | 5 | 1 1/2 | 3/4 | 1/2 | 3/16 | 1,500 | 2.7 | – |
| 3524 | 3524-T | 5 | 2 | 3/4 | 1/2 | 3/16 | 1,500 | 2.5 | – |
| 3525 | 3525-T | 5 | 1 Offset | 1 | 1/2 | 3/8 | 9,000 | 4.0 | – |
| 3526 | 3526-T | 5 | 1 1/4 Offset | 1 | 1/2 | 3/8 | 9,000 | 3.9 | – |
| 3527 | 3527-T | 5 | 1 1/2 Offset | 3/4 | 1/2 | 3/8 | 9,000 | 3.8 | – |
| 3528 | 3528-T | 5 | 2 | 3/4 | 1/2 | 3/8 | 9,000 | 3.4 | – |
| Standard Gasket Part No. | Smaller Gasket Part No. | Well Size I.D. | Drop Pipe Size | Cable Hole Tapping | Vent Tapping | Top Plate | Max. Load | Wgt | List Price |
| 3531 | 3531-T | 6 | 1 | 1 | 1/2 | 3/8 | 1,100 | 4.2 | – |
| 3532 | 3532-T | 6 | 1 1/4 | 1 | 1/2 | 3/8 | 1,100 | 3.9 | – |
| 3533 | 3533-T | 6 | 1 1/2 | 1 | 1/2 | 3/8 | 1,100 | 4.0 | – |
| 3530 | 3530-T | 6 | 2 | 1 | 1/2 | 3/8 | 1,100 | 3.7 | – |
| 3534 | 3534-T | 6 | 1 | 1 | 1/2 | 3/8 | 9,000 | 5.9 | – |
| 3535 | 3535-T | 6 | 1 1/4 | 1 | 1/2 | 3/8 | 9,000 | 5.8 | – |
| 3536 | 3536-T | 6 | 1 1/2 | 1 | 1/2 | 3/8 | 9,000 | 5.7 | – |
| 3537 | 3537-T | 6 | 2 | 1 | 1/2 | 3/8 | 9,000 | 5.4 | – |
| 3550 | 3550-T | 6 | 2 1/2 Offset | 1 | 1/2 | 3/8 | 9,000 | 4.7 | – |
| 3538 | 3538-T | 6 | 3 Offset | 1 | 1/2 | 3/8 | 9,000 | 4.0 | – |
| 3539 | – | 6 | 4 Offset | 2 – 1/2 | 1/2 | 3/8 | 9,000 | 3.0 | – |
| Standard Gasket Part No. | Smaller Gasket Part No. | Well Size I.D. | Drop Pipe Size | Cable Hole Tapping | Vent Tapping | Top Plate | Max. Load | Wgt | List Price |
| 3541 | 3541-T | 6 1/4 | 1 | 1 | 1/2 | 3/16 | 1,100 | 4.3 | – |
| 3542 | 3542-T | 6 1/4 | 1 1/4 | 1 | 1/2 | 3/16 | 1,100 | 4.1 | – |
| 3543 | 3543-T | 6 1/4 | 1 1/2 | 1 | 1/2 | 3/16 | 1,100 | 4.2 | – |
| 3540 | 3540-T | 6 1/4 | 2 | 1 | 1/2 | 3/16 | 1,100 | 3.7 | – |
| 3544 | 3544-T | 6 1/4 | 1 | 1 | 1/2 | 3/8 | 9,000 | 5.9 | – |
| 3545 | 3545-T | 6 1/4 | 1 1/4 | 1 | 1/2 | 3/8 | 9,000 | 5.8 | – |
| 3546 | 3546-T | 6 1/4 | 1 1/2 | 1 | 1/2 | 3/8 | 9,000 | 5.8 | |
| 3547 | 3547-T | 6 1/4 | 2 | 1 | 1/2 | 3/8 | 9,000 | 5.6 | |
| 3548 | 3548-T | 6 1/4 | 3 Offset | 1 | 1/2 | 3/8 | 9,000 | 4.1 | – |
| 3549 | 3549-T | 6 1/4 | 4 Offset | 2 – 1/2 | 1/2 | 3/8 | 9,000 | 3.1 | – |
| 3560 | 3560-T | 6 1/4 | 2 1/2 Offset | 1 | 1/2 | 3/8 | 9,000 | 4.7 | – |
| Consult factory for Seals available with flush mount Stainless Steel bolts. Special drop pipe sizes, special tappings and eye-bolts available upon request. |
|||||||||
|
–
–
| Standard Gasket Part No. | Smaller Gasket Part No. | Well Size I.D. | Drop Pipe Size | Cable Hole Tapping | Vent Tapping | Top Plate | Max. Load | Wgt | List Price |
| 3591 | – | 6 5/8 | 1 | 1 | 1/2 | 1/4 | 2,000 | 6.8 | |
| 3592 | – | 6 5/8 | 1 1/4 | 1 | 1/2 | 1/4 | 2,000 | 6.6 | – |
| 3595 | – | 6 5/8 | 1 1/2 | 1 | 1/2 | 3/8 | 9,000 | 6.4 | – |
| 3596 | – | 6 5/8 | 2 | 1 | 1/2 | 3/8 | 9,000 | 6.2 | – |
| 3597 | – | 6 5/8 | 3 | 1 | 1/2 | 3/8 | 9,000 | 6.0 | – |
| Standard Gasket Part No. | Smaller Gasket Part No. | Well Size I.D. | Drop Pipe Size | Cable Hole Tapping | Vent Tapping | Top Plate | Max. Load | Wgt | List Price |
| 3551 | 3551-T | 8 | 1 | 1 | 1/2 | 3/8 | 6,900 | 10.6 | – |
| 3552 | 3552-T | 8 | 1 1/4 | 1 | 1/2 | 3/8 | 6,900 | 10.6 | – |
| 3553 | 3553-T | 8 | 1 1/2 | 1 | 1/2 | 3/8 | 6,900 | 10.5 | – |
| 3554 | 3554-T | 8 | 2 | 1 | 1/2 | 3/8 | 6,900 | 10.4 | – |
| 3559 | 3559-T | 8 | 2 1/2 | 1 | 1/2 | 3/8 | 6,900 | 10.1 | – |
| 3555 | 3555-T | 8 | 3 | 1 | 1/2 | 1/2 | 12,000 | 10.9 | – |
| 3556 | 3556-T | 8 | 4 | 1 | 1/2 | 5/8 | 27,000 | 11.1 | – |
| 3558 | 3558-T | 8 | 5 Offset | 3/4 | 1/2 | 5/8 | 27,000 | 8.9 | – |
| Standard Gasket Part No. | Smaller Gasket Part No. | Well Size I.D. | Drop Pipe Size | Cable Hole Tapping | Vent Tapping | Top Plate | Max. Load | Wgt | List Price |
| 3561 | 3561-T | 10 | 1 | 1 | 1/2 | 3/8 | 3,800 | 17.4 | – |
| 3562 | 3562-T | 10 | 1 1/4 | 1 | 1/2 | 3/8 | 3,800 | 17.1 | – |
| 3563 | 3563-T | 10 | 1 1/2 | 1 | 1/2 | 3/8 | 3,800 | 17.0 | – |
| 3564 | 3564-T | 10 | 2 | 1 | 1/2 | 3/8 | 3,800 | 16.9 | – |
| 3569 | 3569-T | 10 | 2 1/2 | 1 | 1/2 | 5/8 | 16,500 | 22.5 | – |
| 3565 | 3565-T | 10 | 3 | 1 | 1/2 | 5/8 | 16,500 | 21.5 | – |
| 3566 | 3566-T | 10 | 4 | 1 1/4 | 1/2 | 5/8 | 16,500 | 19.7 | – |
| 3567 | 3567-T | 10 | 5 | 1 1/4 | 1/2 | 3/4 | 32,000 | 19.6 | – |
| 3568 | 3568-T | 10 | 6 | 1 | 1/2 | 3/4 | 34,000 | 15.9 | – |
| Standard Gasket Part No. | Smaller Gasket Part No. | Well Size I.D. | Drop Pipe Size | Cable Hole Tapping | Vent Tapping | Top Plate | Max. Load | Wgt | List Price |
| 3571 | 3571-T | 12 | 1 | 1 | 1/2 | 3/8 | 2,800 | 24.9 | – |
| 3572 | 3572-T | 12 | 1 1/4 | 1 | 1/2 | 3/8 | 2,800 | 24.0 | – |
| 3573 | 3573-T | 12 | 1 1/2 | 1 | 1/2 | 3/8 | 2,800 | 24.0 | – |
| 3574 | 3574-T | 12 | 2 | 1 | 1/2 | 1/2 | 6,600 | 29.9 | – |
| 3575 | 3575-T | 12 | 3 | 1 | 1/2 | 5/8 | 12,000 | 30.6 | – |
| 3576 | 3576-T | 12 | 4 | 1 1/4 | 1/2 | 5/8 | 12,000 | 29.6 | – |
| 3577 | 3577-T | 12 | 5 | 1 1/4 | 1/2 | 3/4 | 22,000 | 30.7 | – |
| 3578 | 3578-T | 12 | 6 | 1 1/4 | 1/2 | 3/4 | 22,000 | 27.1 | – |
| 3594 | 3594-T | 12 | 8 | 1/2 (2) | 1/2 | 3/4 | 22,000 | 20.6 | – |
| Standard Gasket Part No. | Smaller Gasket Part No. | Well Size I.D. | Drop Pipe Size | Cable Hole Tapping | Vent Tapping | Top Plate | Max. Load | Wgt | List Price |
| 3802 | 3802-T | 14″ | 2″ | 1-1/4″ | 1/2″ | 3/4″ | 16,000 | 47.3 | – |
| 3804 | 3804-T | 14″ | 4″ | 1-1/4″ | 1/2″ | 3/4″ | 16,000 | 43.4 | – |
| 3806 | 3806-T | 14″ | 6″ | 1-1/4″ | 1/2″ | 1″ | 40,000 | 45.1 | – |
| 3807 | 3807-T | 14″ | 8″ | 1-1/4″ | 1/2″ | 1″ | 40,000 | 42.0 | – |
| 3814 | 3814-T | 16″ | 4″ | 1-1/4″ | 1/2″ | 3/4″ | 12,500 | 60.0 | – |
| 3815 | 3815-T | 16″ | 5″ | 1-1/4″ | 1/2″ | 3/4″ | 12,500 | 59.0 | |
| 3816 | 3816-T | 16″ | 6″ | 1-1/4″ | 1/2″ | 1″ | 30,000 | 62.7 | – |
| 3818 | 3818-T | 16″ | 8″ | 1-1/4″ | 1/2 | 1″ | 30,000 | 53.9 | – |
| 3820 | 3820-T | 16″ | 10″ | 1-1/4″ | 1/2 | 1″ | 30,000 | 47.0 | – |
| Consult factory for Seals available with flush mount Stainless Steel bolts. Special drop pipe sizes, special tappings and eye-bolts available upon request. |
|||||||||
